IPCONFIG

ipconfig - Windows 2000/NT

You have to use ipconfig to get the same information. In order to do this, follow these steps:


1. Go to the Start menu, Run, then the Command Prompt.
2. Type "ipconfig /all"

Check on Ethernet
· Host IP Address ( IP Address) – as per Non Nat IP addressing note in Call-it
· Subnet Mask – as per Non Nat IP addressing note in Call-it
· Default Gateway – as per Non Nat IP addressing note in Call-it
· DNS Servers – 212.38.173.189 and 212.38.173.190

Check on USB- if connected but unable to view web pages.
· Host IP Address – as per IP address in subscription window in Call-it
· Subnet Mask – automatically assigned
· Default Gateway – should be same as Host IP
· DNS Servers – 212.38.173.187and 212.38.173.188 or 212.38.173.189 and 212.38.173.190


In order to copy result into notepad:

1. Go to the Start menu, Programs, then the Command Prompt.
2. Type ipconfig /all > c:\ipconfig.txt
3. Then type notepad c:\ipconfig.txt
3. This will open up a notepad window similar to the following: